Optional Class 1 package (body color door handle, front door accent lighting, full-length advanced upgrade floor console, heating steering wheel, internal auxiliary handle, IPLED ambient light tube, leather trimmed barrel seat, 4-way headrest, bucket seat, front heating seat, front seat back map pocket, electric four-way drive waist adjustment, electric four-way passenger waist adjustment, rear 60Tap 40 split folding bench, luxury front door trim panel Mopar bright pedal kit, pickup box lighting, electric 8-way driver / passenger seat, power adjustable pedal, advanced package dashboard bezel, rain sensor windscreen wiper, rear door accent lighting, rear seat compartment storage space, rear window defroster, sunshade with illuminated cosmetic mirror, general garage door opener)
KXT single ball rubber joint is a kind of joint product connected by pipe or equipment, which mainly plays the role of shock and noise reduction of pipeline or equipment, protects the normal operation of Guomao of pipeline or equipment, and improves the service life of equipment or pipeline. The use or storage of KXT single ball rubber joints should avoid high temperature, ozone oil and acid-base environment. Sunny outdoor or windward pipes should be set up sunshade. Rainstorm, rain and wind turbidity are strictly prohibited. It is forbidden to brush paint or wrap thermal insulation materials on the surface of the joint.
Fixed shading facilities cannot effectively block solar radiant heat in the morning and afternoon at low angles, especially on the east and west facades. Fixed vertical sunshades can provide some protection in this regard, but also reduce indoor illumination. Carefully arranged plants or mobile external shading facilities can also provide better control at lower solar altitude angles.
Internal thermal insulation system when the greenhouse or indoor temperature drops to the set low temperature limit at night, turn off the thermal insulation quilt, strengthen the heat preservation of the greenhouse, design and construction of the solar greenhouse greenhouse, reduce the ground radiation heat loss, reduce the heating energy consumption, and the design and construction of the ecological restaurant, greatly reduce the operating cost of the greenhouse; in the daytime, the shade curtain can be opened, and the design and construction of the multi-span greenhouse greenhouse can make the greenhouse fully daylighting. The working principle is the same as that of internal sunshade, which is made of a lightweight quilt that does not absorb water and weighs between 100 and 150 grams.
Strength description: please wear hiking shoes or travel shoes, do not wear leather shoes, high heels, backpacks, sunshade hats, the route is about 8 kilometers, rising and falling are about 400 meters. Enjoy the lace and play, have a picnic after enough, there is no danger in the route, just be careful, please listen to the arrangement of the team leader to ensure safety.
However, the effect of indoor shading is not as good as external shading, it only blocks the light, but not the heat. When the light encounters the inner shading facilities, the radiant heat has already entered the room through the glass, and the glass temperature will rise very high. As for the external sunshade, only that part of the sunlight will reach the outer surface of the glass window directly. In general, bright indoor blinds can only block 17% of the solar radiation heat, while the outdoor horizontal sunshade with an elevation of 45 °south can block 68% of the solar radiation heat. The shading effect of the two is very different.
Air-conditioned buildings rely on refrigerators to move the indoor heat load to the outside in summer. Obviously, if the indoor heat load is reduced, the running time of the refrigerator will be reduced, and the energy consumption of the cooling tower system will be reduced. The indoor heat load comes from two aspects, one is the heat exchange caused by the indoor and outdoor temperature difference, and the other is the heat load caused by indoor lighting and equipment. Therefore, sunshade, airtight, thermal insulation and other methods can be used to reduce indoor heat load and achieve energy saving. 1, reduce indoor heat load (1) sunshade to reduce direct sunlight radiation roof, wall, window and through the window to enter the room, you can use eaves, sunshade panels (awnings), coated glass, etc.; reduce the heat radiation of the external walls and roofs, you can use light-colored exterior wall finishes to set the insulation layer on the outside of the external walls and roofs, or overhead roofs.
Although, there are some minor complaints in the process. “before the introduction of the policy, I saw someone cooking hot pot on the lawn, hurting the grass. When they left, they also left some rubbish. ” Ms. Mak, a citizen, said. In view of this situation, according to the person in charge of the Yuntai Garden Management Center of Baiyunshan Scenic spot, the tent area of the park will be in charge of a fixed area, a fixed period of time and a special person. At present, two large lawns in Yuntai Garden are open for citizens to set up tents from 10:00 to 4 pm on weekends and holidays. Members of the public can set up tents and picnics. The garden will also provide sunshade facilities and designate garbage dumping areas. Kites and fire are prohibited on the lawn.
Therefore, in the structure of the window, in order to be able to control the illuminating effect of sunlight, the area of the window wall should not be too large. If the window area is relatively large, it should be considered to choose heat reflection glass, endothermic glass or other shading methods, such as eaves, eaves, sunshade panels, window cloths and so on to block the absorption of heat. Improve the airtightness of doors and windows and reduce the number of ventilation in the room. For example, the selection of outstanding airtight doors and windows, or the addition of closed bars on doors and windows can improve the airtightness of doors and windows. Choose the automatic control system. The automatic control system includes energy control of cold and heat source, fresh air volume control, quantity control of air conditioning system, start and stop time and operation mode of equipment, supply air temperature control, temperature and humidity setting control and so on. The automatic control system can complete the convergence management and good control of the air conditioning system, and guess the air state parameters (temperature, humidity, enthalpy, concentration, etc.) in the room surface to keep the indoor environment comfortable.
When the sun shines on the sunshade, some of the heat will be blocked, and the ultraviolet light will be reflected by the aluminum foil. Car sunshade can prevent leather seats and dashboards from being damaged by ultraviolet rays. Direct exposure to the sun will make the temperature in the car as high as 70 degrees. Not only the shell of the central console is easy to deform, instruments and other equipment on the dashboard are also damaged by high temperature, such as aging components, pin soldering, etc., sunshade can effectively avoid direct sunlight.
